The latest offering from BTR in high quality cast aluminum intake manifolds! The Trinity is short runner, 3-piece design that allows for the ultimate in application flexibility. It is similar in concept to billet Intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. It utilizes the high LT1 throttle body position and will accept DBW or cabled throttle bodies*, but yet it will fit in the tight confines of the C7, C6, C5 Corvette as well as the popular F-body platforms. The design incorporates 2 runners and an interchangeable plenum. The seal is generated by 8 entrapped O-rings at the runner/plenum interface, and is clamped by 20 -M6 Stainless steel socket head cap screws. The port seals are achieved SAE O-rings seated in a dovetailed O-ring groove. Both the port mouth radius and the port match is CNC machined. The Trinity incorporates 2-1/4 -27 NPT ports on the side of the throttle body boss and a 3/8-18” NPT on the rear. The manifold is available in Black Satin Texture powder coat. The manifold comes semi-assembled and includes all the hardware required to bolt it on. Runners and plenums can be purchased separately.
BTR – Trinity Intake Manifold for LS3 Engines (TRA-3-BLK)
$879.99
-
Brand | Brian Tooley Racing |
---|---|
Part Type | Intake Manifold |
Finish | BLACK |
Manifold Material | CAST ALUMINUM |
Fuel Rails Included | NO |
Manifold Port Style | LS3/L99 – SQUARE PORT |
Engine Type | Gen III/Gen IV LS |
Manifold Fueling Style | EFI |
Ships from manufacturer
Description
Reviews (0)
Add a review
You must be logged in to post a review
Log In
Questions & Answers (11)
Customer questions & answers
-
What is the length and width of this intakes manifold
-
Q What is the length and width of this intakes manifold answer nowAsked by Kaal whitmore on December 30, 2023 10:39 amA We don't stock this manifold so I don't have one to measure, you'd need to call btr for those specs
What is the horsepower range?
-
A Haven't tested this manifold to know its limitations, you may contact btr to see what experience they've hadA What’s the horse power gain on a n/ a with the BTR intake manifold 2013 Camaro ss manual transmission
Do you have this part in stock? BTR – Trinity Intake Manifold for LS3 Engines (TRA-3-BLK)
-
Q Do you have this part in stock? BTR – Trinity Intake Manifold for LS3 Engines (TRA-3-BLK) answer nowAsked by Johnathan Williams on June 30, 2023 12:13 pmA We do not stock this manifold
Do you guys have this in stock?
-
A We do not stock these manifolds
Considering this intake for a turbo built on a 2000 gen 4 Camaro. I want the intake to fit under stock hood. Will this be a good intake to support high HP such as 1300-1400 to the wheels? 25 to 30 LBS boost.
-
Q Considering this intake for a turbo built on a 2000 gen 4 Camaro. I want the intake to fit under ...... Read more answer nowAsked by Ruben Burgos on February 6, 2023 9:36 amA We haven't installed or tuned this manifold to my knowledge so I'm not sure on clearance for your application but I would think it would be okay
Would this is intake be a good option to run with a SS4 and ported/58cc milled heads stick car?
-
Q Would this is intake be a good option to run with a SS4 and ported/58cc milled heads stick car? answer nowAsked by NickMac on October 4, 2022 6:43 amA Not a huge fan of the trinity manifold, I would recommend the hi ram
Dies this come with an option to get the fuel rails with it?
-
Q Dies this come with an option to get the fuel rails with it? answer nowAsked by Jacob on June 28, 2022 12:06 amA Yes its a separate part number we have on our site part number FRK-01
Do you have this intake in stock
-
A Not in stock
Will a nick Williams 103 work on this intake
-
A Yes it will
What the length of the runners Trying to see what this does compare to my fast 102mm with high hp runners in my 418ci
-
Q What the length of the runners Trying to see what this does compare to my fast 102mm with high hp...... Read more answer nowAsked by Sam on November 24, 2021 2:11 amA Not sure we haven't dyno tested this manifold, you may call btr for the dimensions
- 1
- 2
Reviews
There are no reviews yet