THE ONLY APPROVED USE OF THIS TOP FOR ROAD CIRCUIT TRACK RACING IS -6 WITH OUR MILD SYSTEM, OTHERWISE EMAIL US!
This is for our standard size 3″ cans only at this time (DOES NOT FIT 3.5″ XL)
If this is on an order using any fitting larger than -6 or 3/8″ barb, it will work for street / drag strip only.
If this is an upgrade to a separate can, it only fits Gen 5+ (does not fit Gen 3-/4/5). If you are not sure, email us a photo.
This sets the can up with a fitting on top of the can instead of the breather.
This will include the Fitting type lid, the -an size fitting chosen above, a 120* hose end, 3ft of hose, a hose barb adapter, and a grommet for mounting, and Instructions HERE
It is useful for extreme fumes control or visual inspection aid.
It is also safer than the breather top in the event of an emergency overflow to help avoid a dangerous fire.
If you add this to a RACE can it will continue to be fully open, and if you add this to DRAFT / PCV can it will continue to be vacuum closing.
Choose your pressure vent release fitting size: This should be at least as large as you can inlet fitting.
-for crankcase ventilation HP ratings are: -6AN=600HP capacity, -8AN=800, -10AN=1000, and -12AN=1200HP maximum
Here is a video of it in action:
https://www.mightymousesolutions.com/product-page/fitting-top
Made in the USA!
A Mightymouse Solutions Exclusive!
Reviews
There are no reviews yet