Lightweight Series Crankshaft
Notes:
- The stock timing crank gear may need to be chamfered to clear the larger radius on the snout of the crankshaft.
- Manley crankshafts are not intended for use with highly boosted roots style cog belt superchargers.
Manley – Gen V LT1 4.00″ Stroke Crankshaft (194258)
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
$1,244.28
Chevrolet Gen V LT1 Lightweight Series Crankshaft
- 58-Tooth Reluctor Wheel
- 4.000” Stroke
- 6.125” Minimum Rod Length
- 2.559” Main Journals
- 2.100” Rod Journals
- 1820 Grams Bobweight
- 51-53 Lbs.
- Wet Sump Application
Description
Questions & Answers (5)
Customer questions & answers
-
there will fit on L83 with 6.125 rod K1 H-beam and 4" stroke piston (manley 561320CE) or need notch bottom cylinder
-
Q there will fit on L83 with 6.125 rod K1 H-beam and 4" stroke piston (manley 561320CE) or need not...... Read more answer nowAsked by jean-marc sans-cartier on October 11, 2021 8:38 pmA Not sure we haven't done that set up before
Is this a short snout (wetsump) crank or longsnout (dry sump) crank?
-
Q Is this a short snout (wetsump) crank or longsnout (dry sump) crank? answer nowAsked by Joe on February 14, 2021 4:42 pmA
The 194258 is wet sump, the 194458 is for the dry sump with the extended snout. Sorry we didn't clarify that on the product posting. Thank you!
Will the Manley – Gen V LT1 4.00″ Stroke Crankshaft (194258) work with your drop in piston/rod kit for the L83 5.3 Gen V engine? I have two bad connecting rod bearings and need to replace the bottom end kit and wanted to make sure that his would work or do I need to stick with the stock crankshaft for your drop in piston/rod kit?
-
Q Will the Manley – Gen V LT1 4.00″ Stroke Crankshaft (194258) work with your drop in piston/rod ki...... Read more answer nowAsked by Christopher Lloyd on December 24, 2020 9:15 pmA
Our L83 drop-in kit is setup to work with stock stroke, it's not going to work on this 4.00" stroke.
will this crankshaft work on a 427 stroker genV lt1?
-
Q will this crankshaft work on a 427 stroker genV lt1? answer nowAsked by Ernesto Perez on November 9, 2020 11:07 amA Yes, you would need a 4.125" bore on the cylinders matched with this 4.000" stroke crank to make a 427 CID! Thanks, Team GPI
What is the horsepower rating of this crank
-
Q What is the horsepower rating of this crank answer nowAsked by raydub32 on July 20, 2020 12:52 pmA According to the Manley website, this crankshaft is rated up to 1,000 with forged rods and pistons.
Great part service