The latest offering from BTR in high quality cast aluminum intake manifolds! The Trinity is short runner, 3-piece design that allows for the ultimate in application flexibility. It is similar in concept to billet Intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. It utilizes the high LT1 throttle body position and will accept DBW or cabled throttle bodies*, but yet it will fit in the tight confines of the C7, C6, C5 Corvette as well as the popular F-body platforms. The design incorporates 2 runners and an interchangeable plenum. The seal is generated by 8 entrapped O-rings at the runner/plenum interface, and is clamped by 20 -M6 Stainless steel socket head cap screws. The port seals are achieved SAE O-rings seated in a dovetailed O-ring groove. Both the port mouth radius and the port match is CNC machined. The Trinity incorporates 2-1/4 -27 NPT ports on the side of the throttle body boss and a 3/8-18” NPT on the rear. The manifold is available in Black Satin Texture powder coat. The manifold comes semi-assembled and includes all the hardware required to bolt it on. Runners and plenums can be purchased separately.
BTR – Trinity Intake Manifold for Gen V LT
$899.99
-
| Brand | Brian Tooley Racing |
|---|---|
| Part Type | Intake Manifold |
| Finish | BLACK |
| Manifold Material | CAST ALUMINUM |
| Fuel Rails Included | NO |
| Manifold Port Style | LTx – GEN V |
| Engine Type | Gen V LT |
| Manifold Fueling Style | EFI |
Frequently Purchased Together
From: $729.99
Description
Questions & Answers (14)
Customer questions & answers
-
will this fot my 2018 silverado l83?
-
A Yes
will the lt5 95mm tb work with this intake or do these only mate to the 103
-
Q will the lt5 95mm tb work with this intake or do these only mate to the 103 answer nowAsked by on February 26, 2024 10:33 amA I would think it would work for both but you may contact btr and get clarification on that
Would this manifold fit 2014 Corvette Stingray Z51 with ECS supercharger and would it fit under the hood ? Do i need to buy fuel rails for it. I just want to bolt it on with a 103 throttle body
-
Q Would this manifold fit 2014 Corvette Stingray Z51 with ECS supercharger and would it fit under t...... Read more answer nowAsked by on September 9, 2023 5:49 pmA You'll only need fuel rails if you're running port injection, yes it will fit your car and fit under the hood. I can't say what you may have to do to make it work with the ecs kit but I would think it should go on no issues
Do you happen to know if the LT4 HPFP fits under this manifold like the holley hi ram does?
-
Q Do you happen to know if the LT4 HPFP fits under this manifold like the holley hi ram does? answer nowAsked by on June 20, 2023 10:12 pmA Yes it does
Does the stock lt1 camaro fuel rails fit for the BTR?
-
Q Does the stock lt1 camaro fuel rails fit for the BTR? answer nowAsked by on June 4, 2023 10:15 amA The lt1 rails sit below the manifold its not like the ls platform, you would use ls style rails that btr sales for the manifold if switching to or adding port injection
What would be the best throttle body to pair with the BTR intake manifold for the 6th gen Camaro?
-
Q What would be the best throttle body to pair with the BTR intake manifold for the 6th gen Camaro? answer nowAsked by on February 24, 2023 9:44 amA Katech 103
Is the btr intake manifold better than the msd or the msd better than btr on a 6 gen
-
Q Is the btr intake manifold better than the msd or the msd better than btr on a 6 gen answer nowAsked by on March 8, 2022 11:30 amA Haven't had any r&d done on the manifold ourselves but for na set up I'd go with msd and if boosted the btr
What is the actual height of this intake?
-
A I'm not sure, you may reach out to btr directly and ask them
How does this compare to the hi ram on an NA application? Have a big cam and heads.
-
Q How does this compare to the hi ram on an NA application? Have a big cam and heads. answer nowAsked by on December 11, 2021 7:42 pmA We haven't tested one yet to know, will be testing on customers vehicle using our track attack cam here in the coming weeks we'll post results on our team gpi page on facebook
Would this manifold work well on a 6th gen Camaro fbo stock cam?
-
Q Would this manifold work well on a 6th gen Camaro fbo stock cam? answer nowAsked by on September 12, 2021 5:58 pmA We haven't done any testing on this manifold yet so it's hard to say how it will perform in comparison to the lt2 manifold
-
- 1
- 2
-
Great manifold for a boosted LT1. Comes with all the hardware you need to get it fitted on the car. Just make sure to get the evap adaptor.
Even though I changed to the hi-ram last min they managed to change order for me and get my hi-ram fast
Great