These are LS hydraulic street performance style lifters with attached tie bars. They will work in original equipment style blocks and are designed to eliminate the stock plastic lifter trays. They have a fully shrouded roller wheel which is stock diameter. Lifter body diameter is .842with a .700diameter wheel.
Cam Motion – LS Hydraulic Roller Lifters (Tie Bar Style)
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
$498.37
-
In Stock
Description
Questions & Answers (12)
Customer questions & answers
-
What is the recommended preload for this lifter.
-
Q What is the recommended preload for this lifter. answer nowAsked by Johnathan on January 16, 2024 8:45 pmA I'm not sure on these lifters I believe they're a morel design best to call cam motion and ask them for the specs
Would these be a good choice for your 03-01-0042 camshaft 244/256 @.050 621/6xx lift Going in a forged 408/ afr's 7500 rpm?
-
Q Would these be a good choice for your 03-01-0042 camshaft 244/256 @.050 621/6xx lift Going in a f...... Read more answer nowAsked by Clay on October 17, 2023 10:39 amA Not sure what camshaft that is you're referring to but we prefer the johnson 2110r lifters or the link style version over the cam motions
I have a ls7 Corvette Going with a big cam btr stage 4 v2 I plan to rev the car to 7300rpms Will these lifters hold up ? Or is there another Morell lifter I should be looking for Looking to order asap
-
Q I have a ls7 Corvette Going with a big cam btr stage 4 v2 I plan to rev the car to 7300rpms Will ...... Read more answer nowAsked by Armondo Reyes on August 31, 2023 12:01 amA I would recommend the 88958689 or johnson lifters
Who makes these lifters?
-
A Morel
Would these be good enough for a forged 370 lsa build with ported heads, blower, pullies, 80e stall, in a trailblazer ss
-
Q Would these be good enough for a forged 370 lsa build with ported heads, blower, pullies, 80e sta...... Read more answer nowAsked by Rodney on February 26, 2023 9:20 pmA Yes these should be fine for that application
Should these be cleaned in mineral spirits then soaked in oil or just soaked in oil before installing?
-
Q Should these be cleaned in mineral spirits then soaked in oil or just soaked in oil before instal...... Read more answer nowAsked by Kevin Chatman on February 3, 2023 8:09 amA Wouldn't hurt to clean them before soaking
Will these fit a L83 engine?
-
A Yes
Are these drop in style?
-
A Yes
What's the max rpm these will support? I'm building my engine for 7600rpm shifts.
-
Q What's the max rpm these will support? I'm building my engine for 7600rpm shifts. answer nowAsked by Rodney T on February 25, 2022 1:33 pmA They should work fine
will these support a 235/248 111LSA .649/.615 cam with .660 springs?
-
Q will these support a 235/248 111LSA .649/.615 cam with .660 springs? answer nowAsked by Bryce Cronin on October 24, 2021 3:57 pmA Yes
- 1
- 2
Awesome lifters, used in my LME 440 build and couldn’t be happier!