Intake Manifolds
Products
Intake Manifolds
ICT Billet – Map Extension Harness for LT2 Intake Manifold
Part Number: MAP40-24
View Details
Induction
LS3 Intake Manifold Mod (Ported Rod Mod or Rod Mod Only)
Part Number: GPI-LS3-MANIFOLD-MOD
GPI - LS3 Intake Manifold Mod - Best Performing and Value Intake Manifold for your LS3! Rod Mod Only During the “Rod-Mod” process, we take the LS3 intake manifold and install radius bars lengthwise in the plenum. Through research and development, we have learned that air does not…
View Details
Intake Manifolds
Chevrolet Performance – LT2 Intake Manifold Package (12697714)
Part Number: LT2MANI-PACKAGE
- Genuine LT2 intake from Chevrolet Performance
- Optional porting & mods for boosted airflow
- Throttle body & harness upgrades available
- Improves throttle response & power
- Fits 6th Gen Camaro only – not plug-and-play for C7
Induction
OEM L86 (6.2L) Intake Manifold and Throttle Body Swap for L83 (5.3L) Trucks (2014-Up GM Truck)
Part Number: L86-MANI-TB-SWAP-KIT
- Bolt on application for the 2014 and up, GM Truck with the 5.3L DI Engine!
- Choose from either the standard version or the ported version!
- No tuning adjustments necessary!
- Throttle Body relearn is recommended to reset the learned blade position for idle function. (Done with GM and most scan tools)
Induction
2014-Up GM Truck L86 6.2L DI Intake Manifold
Part Number: 12639087
- Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications
- Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Induction
MSD – Atomic AirForce LT1 Intake Manifold (2700)
- CARB Approved, 50 State Legal EO# D-722-1!
- Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
- The two-piece manifold design provide convenient access to the runners for porting.
- Direct flow path runner design promotes maximum airflow.
- 103mm Throttle bore allows the use of large throttle bodies for greater air flow.
Induction
GPI 2014-Up GM Truck L86 6.2L DI Intake Manifold (Ported)
Part Number: L86-PORT
- Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of application
- Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service bulletins
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Intake Manifolds
Holley – Hi Ram Intake Manifold 105mm Longitudinal Mount w/o Port EFI Provision Gen V LT1 (300-142)
Part Number: 300-142
- For GM Gen V LT1 engines
- Compatible with OE or aftermarket heads
- Supports 427-440 cubic inch displacement
- Optimized for 7500-8500 rpm
- Requires modified hood
Intake Manifolds
BTR – Trinity Intake Manifold for Gen V LT
Brand Brian Tooley Racing Part Type Intake Manifold Finish BLACK Manifold Material CAST ALUMINUM Fuel Rails Included NO Manifold Port Style LTx - GEN V Engine Type Gen V LT Manifold Fueling Style EFI
View Details
Induction
Holley – GM LS3/L92 Modular Hi Ram Intake Manifold (300-117)
Part Number: 300-117
- For LS3/L92
- Designed for use with 1 x 102mm GM LS Throttle Body, which is sold separately
- Longitudinal Mount Plenum Top
Intake Manifolds
Part Number: TRA-GENV-BLK-ML
- Mid-length runner for enhanced performance.
- 3-piece design offers maximum flexibility.
- Ideal for 3500-7500 RPM operating range.
- Supports drive-by-wire and cable throttle bodies.
- Black satin powder coat finish for durability.
Intake Manifolds
Holley – Hi Ram Intake Manifold for LS3 / L92 Black 105mm (300-117BK)
Part Number: 300-117BK
- Cost-effective, high-performance intake
- Modular base for custom systems
- Machined EFI fuel rails for high flow
- Cast aluminum construction
- Designed for 6.0 to 7.0+ liter engines
Intake Manifolds
FAST – LSXR Intake Manifold 102mm Intake Manifold for LS3, L99, L92, L76 (146102B)
Part Number: 146102B
FAST™ engineers teamed up with airflow specialists at RHS™ to develop a polymer intake manifold for rectangular port GM L92/LS3 engines. Testing on a stock LS3 engine with a Big Mouth 102mm Throttle Body™ produced gains of 14+ horsepower and 11+ ft/lbs of torque at the flywheel over…
View Details
Intake Manifolds
Holley – Hi Ram Lower Manifold Gen V LT1 (300-237)
Part Number: 300-237
LT1 Hi-Ram, Lower Manifold Only w/out Port EFI Provisions. Order Plenum Top Separately.
View Details
Induction
MSD – Atomic AirForce LS7 Intake Manifold (2701)
Part Number: 2701
- CARB Approved, 50 State Legal EO# D-722-1!
- Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
- The two-piece manifold design provide convenient access to the runners for porting.
- Direct flow path runner design promotes maximum airflow.
- 103mm Throttle bore allows the use of large throttle bodies for greater air flow.
Intake Manifolds
Holley – Hi Ram Intake Manifold 105mm Longitudinal Mount w/ Port EFI Provision Gen V LT1 (300-140)
Part Number: 300-140
- Fits GM Gen V LT1 engines
- Compatible with OE or aftermarket heads
- Supports 427-440 cubic inch engines
- Handles 7500-8500 rpm speeds
- Requires modified hood
Intake Manifolds
BTR – Trinity Intake Manifold for LS3 Engines (TRA-3-BLK-P105-V2)
Part Number: TRA-3-BLK-P105-V2
Brand Brian Tooley Racing Part Type Intake Manifold Finish BLACK Manifold Material CAST ALUMINUM Fuel Rails Included NO Manifold Port Style LS3/L99 - SQUARE PORT Engine Type Gen III/Gen IV LS Manifold Fueling Style EFI
View Details
Induction
CID – BE LS3 Intake Manifold. 9.24″ Deck. 4500 EFI
Part Number: CID-LS3-40
- Fuel injected version. Comes with fuel rails and CNC fuel rail stands
- The BE LS3 intake manifold is designed for 600+ HP street, race and marine applications.
- Near equal length runners that are 4" in area at the plenum opening with enough material to increase area to 5.5" at plenum
- Designed to fit modified GM LS3 port openings
- Intake Manifold suits a 9.24" deck block
Intake Manifolds
Holley – Hi Ram Intake Manifold 92mm Longitudinal Mount w/o Port EFI Provision Gen V LT1 (300-143)
Part Number: 300-143
- Designed for GM Gen V LT1 engines
- Compatible with OE or aftermarket heads
- Supports 427-440 cubic inch displacement
- Max engine speeds of 7500-8500 rpm
- Requires modified hood for most vehicles
Intake Manifolds
FAST – LSXR Intake Manifold 102mm Intake Manifold for LS1, LS2, LS6 (146302B)
Part Number: 146302B
Constructed from the same advanced polymer material as the LSX™ 92mm Intake Manifold, the LSXR™ offers a host of benefits over aluminum aftermarket intakes, including lighter weight, increased strength and improved heat dissipating characteristics. While the LSXR™ features a 102mm air inlet that is perfectly suited to the…
View Details