Circle D – 6L80/90 Pro Series Multi Disk Converter
$1,549.00
-
Three diameters are available for the 6L80 Pro Series Multi Disk.
245mm is good for lighter cars and big NA setups.
258mm is great for heavy cars and smaller trucks, bigger power setups, or more of a street build.
265mm is for a really big power setup or large heavy trucks.
(Most converters are built-to-order; current lead time is around 3-4 weeks)
Frequently Purchased Together
L99 to LS3
Description
Three diameters are available for the 6L80 Pro Series Multi Disk.
245mm is good for lighter cars and big NA setups.
258mm is great for heavy cars and smaller trucks, bigger power setups, or more of a street build.
265mm is for a really big power setup or large heavy trucks.
Questions & Answers (39)
Customer questions & answers
-
Which converter size and bolt pattern for a 2009 chevy tahoe stage 3 tsp truck cam rwd 6l80e
-
Q Which converter size and bolt pattern for a 2009 chevy tahoe stage 3 tsp truck cam rwd 6l80e answer nowAsked by on June 24, 2026 12:16 pmA Likely 265 diameter and whatever stall speed that manufacturer recommends for that cam
I have a 2011 camaro 2ss 6.2 engine with a f35 cam that's requires stall speed of 4000 + which one would be best for my car i have long tube headers & 102 intake & throttle body ....
-
Q I have a 2011 camaro 2ss 6.2 engine with a f35 cam that's requires stall speed of 4000 + which on...... Read more answer nowAsked by on May 20, 2026 9:46 amA 245 diameter 4000+ 5C pump stator
I have a 2016 Chevy Silverado 1500 LT. front wheel drive I want to change torqueconverter out, but I want a little bit more power. What do you recommend?
-
Q I have a 2016 Chevy Silverado 1500 LT. front wheel drive I want to change torqueconverter out, bu...... Read more answer nowAsked by on April 15, 2026 8:58 pmA Email us at support@gwatneyperformance.com so we can better assist you
What converter would be best for a 2010 Camaro ss red hot cam, long tubes, lsa blower with the 6l80?
-
Q What converter would be best for a 2010 Camaro ss red hot cam, long tubes, lsa blower with the 6l80? answer nowAsked by on October 11, 2025 2:23 pmA Lot of variables there I would recommend reaching out to circle d direct for their recommendation
What would be the best set up for 1000 hp 2013 CTSV coupe ? Thanks for your time in advance.
-
Q What would be the best set up for 1000 hp 2013 CTSV coupe ? Thanks for your time in advance. answer nowAsked by on June 29, 2025 6:46 pmA Email us at support@gwatneyperformance.com so we can better assist you
I want to buy a stall but I’m not sure which one to go with..?, I have a 2018 Chevy Silverado 1500 LT crew cab, I was told to get a 3600 stall for better launch from a stop. I’m also planning on putting a procharger and a stage 3 boosted cam in the future and I need help on choosing the right stall my for my setup
-
Q I want to buy a stall but I’m not sure which one to go with..?, I have a 2018 Chevy Silverado 150...... Read more answer nowAsked by on June 18, 2025 2:51 amA Email us at support@gwatneyperformance.com so we can better assist you
What converter and stall speed do you guys recommend ? For my ls3 2008 auto I bought your whole cam kit stage 3 and I have long tube and Straight pipe and k&n intake and lsx intake manifold and a 102 tb and racetronic fuel pump and dsx flex fuel kit
-
Q What converter and stall speed do you guys recommend ? For my ls3 2008 auto I bought your whole c...... Read more answer nowAsked by on June 16, 2025 1:54 amA 245mm 3600+ 4C would be good
I have a stroker 416 ls3 with a Whipple blower that's gonna make about 1200 crank HP... Will this work well
-
Q I have a stroker 416 ls3 with a Whipple blower that's gonna make about 1200 crank HP... Will this...... Read more answer nowAsked by on May 20, 2025 8:56 pmA Likely a variation of this will work, I would reach out to Circle D direct and let them know what you have so they can get you the correct diameter and pump/stator combo for your application
I have a 2018 Chevy Silverado 1500 crew cab 6L80 and I want a stall that can launch off from a stop quick. I was recommended a 3600 stall but I’m not sure about the mm and bolt pattern
-
Q I have a 2018 Chevy Silverado 1500 crew cab 6L80 and I want a stall that can launch off from a st...... Read more answer nowAsked by on May 1, 2025 3:07 pmA You'll need the 245mm diameter for that stall speed and you'll want the ls dual 6 lug bolt pattern
which one would you recommend for a 2019 camaro 2ss
-
A which one would you recommend me for a 2019 camaro 2ss, i'm going with the ss3 gpi camA You'll want to use a 3600+ stall speed and you'll need a 10l90 converter https://gwatneyperformance.com/circle-d-gm-hp-series-10l90-torque-converter/
-
- 1
- 2
-
Nice piece
10/10
Haven’t installed it yet but I know it’s gonna rip
Torque converter come fast
works great