Chevrolet Performance – Racing Hydraulic Roller Lifters (88958689)
$561.68
-
- Lifters (Hydraulic Roller)
- OEM Style Bar
- LS
- Set of 16
In stock
Frequently Purchased Together
Description
As developed by GM Racing and GM Powertrain. For use in Gen III and Gen IV engines where sustained high rpms are typical. Special reduced-mass internal components allow for higher limiting speeds with aggressive camshafts designs. Improved valvetrain dynamics and stability will imporve horsepower, and high rpms. Tested to 8000 rpm in GM Racing applications. Set of 16.
Lifter Style: Hydraulic roller
Lifter Link Bars Included: No
Link Bar: OEM
Lifter Offset: None
Quantity: Sold as a set of 16.
Questions & Answers (36)
Customer questions & answers
-
For a 15 gmc l86, dod delete, these should work right?
-
Q For a 15 gmc l86, dod delete, these should work right? answer nowAsked by on September 11, 2026 12:55 pmA Yes
Will these work with 7.200 push rod chevy 604 crate race engine
-
Q Will these work with 7.200 push rod chevy 604 crate race engine answer nowAsked by on September 8, 2026 5:49 amA As long as it uses a ls style lifter yes it should work, not certain on your preload with that length pushrod you'll need to measure and validate that
Can these be used with btr platinum dual springs?
-
A Yes
what is the preload for the Caddy racing lifters - PN# 88958689
-
Q what is the preload for the Caddy racing lifters - PN# 88958689 answer nowAsked by on November 28, 2025 5:09 pmA Its a .200 travel lifter we look for 3/4 to 1 3/4 turns from zero lash
will these fit my 2018 camaro ss/lt1
-
A Yes
Will these fit on my 2021 camaro lt1
-
A Yes
What length pushrod should I run these lifters with in a LS2 corvette?
-
Q What length pushrod should I run these lifters with in a LS2 corvette? answer nowAsked by on June 8, 2025 10:14 pmA Relative to a lot of other variables, email us at support@gwatneyperformance.com
Getting a EL-C7 cam (version 2) with 7.850 3/8" Pushrods for 2019 Camaro ss will these work for that?
-
Q Getting a EL-C7 cam (version 2) with 7.850 3/8" Pushrods for 2019 Camaro ss will these work for t...... Read more answer nowAsked by on May 26, 2025 4:49 pmA They should just need to validate the preload
I have an ls2 getting a red hot kit from btr the pushrods are 7.400, would these work well?
-
Q I have an ls2 getting a red hot kit from btr the pushrods are 7.400, would these work well? answer nowAsked by on April 10, 2025 9:46 amA Yes these will work great for that
Im using these lifters in my lt4. A 7.765 pushrod puts me at ZERO lash. What pushrod length would you recommend? ....7.850 or 7.825? The engine has a PD2 cam in it with CHE trunions and PSI behive springs.
-
Q Im using these lifters in my lt4. A 7.765 pushrod puts me at ZERO lash. What pushrod length would...... Read more answer nowAsked by on January 15, 2025 10:35 amA We look for 3/4 to 1 3/4 turns from zero lash for proper preload we usually run a 7.850 with stock unmilled heads and stock thickness head gaskets puts you right in the sweet spot
-
- 1
- 2
-
Amazing product
Great product
Have to say that I’m very very happy with these lifters. Got the DOD lifters out and as GPI recommended these lifters has performed great. Soaked in motor oil for 1 night and during first start up I never noticed once heard any lifter noise. Great product and very happy I listen to GPI during buying the conversion kit.
Lifters are great no noise
same